Swipe your finger over the easy-to-clean rubber nozzles to wipe away hard water buildup. For a more thorough clean, we recommend soaking your shower head in distilled white vinegar for 30 minutes before rinsing. You can do this using one of the following methods:
Method 1: Removing the showerhead, soaking it in vinegar, and then reinstalling. **Note – replace old Teflon tape when reinstalling.
Method 2: Filling a bag with vinegar and tying the bag to the shower arm. **Note – make sure the bag is secured to the shower arm and that the vinegar reaches the shower nozzles.
This eco-friendly method will not only dissolve mineral deposits and disinfect your showerhead but it will also help preserve the metal finish. Use an old toothbrush to brush away any stubborn spots.
If you can’t hand-loosen the old showerhead, using a crescent wrench will help you with the removal process. Support the showerhead with your hand and loosening the showerhead with the crescent wrench.
If the FAQs do not answer your questions, contact us any time at 1-800-PFAUCET (1-800-732-8238). We’re here to help!